ΑΡΧΙΚΗ > ΠΡΟΪΟΝΤΑ > ΕΜΦΥΤΕΥΜΑΤΑ >INTERNAL HEX > UH8 PURE&POROUS

 Ø3.3-5.0mm  |  L8-L16mm | Platform & Connection -Internal Hex RP 

Uniqa Dental Implant PURE&POROUS®

UH8 PURE & POROUS – Internal Hexagonal connection Regular Platform Pure & Porous dental implant UH8 dental implant with highly developed porosity and high surface cleanliness in accordance with RBM type of surface treatment. 

uniqa εμφυτευματα
UNIQADENTAL Blister Back
UNIQADENTAL Blister
UNIQADENTAL Implant

THE PURE & POROUS SURFACE IS WELL STRUCTURED AS SLA AND CLEAN AS RBM

Pure & Porous modification of dental implant’s surface unites the well-known advantages of SLA* and RBM** types of the surface (highly developed porosity for SLA and high surface cleanness for RBM), and is free from their drawbacks (occasional remains of blasting particles for SLA, and is not well structured surface topography for RBM).

*SLA is Alumina (or Sand) Blasted, Large-grit, Acid-etched surface of dental implants, pioneered by Strauman.

**RBM is a dental implants surface treated by Resorbable Blasted Media (Hydroxyapatite and other Calcium Phosphates) following by light acid washing, pioneered by Lifecore.

Implant
SEM micro- photographs X50
EXCEPTIONALLY CLEAN​ 100%
Porous
SEM micro- photographs X 2000
VERY POROUS 100%

Η Vagusdent είναι πλέον ο επίσημος και Αποκλειστικός Αντιπρόσωπος της UNIQA σε Ελλάδα και Κύπρο

IMPLANTS DIMENSIONS TABLE

UNIQA DENTAL

ΚΑΣΕΤΙΝΑ ΧΕΙΡΟΥΡΓΙΚΩΝ ΕΡΓΑΛΕΙΩΝ

UNIQADENTAL
UNIQADENTAL

Περιέχει 17 εργαλεία:

Marking drill; 2,0 pilot drill; 2,5 drill; 2,8 drill; 3,2 drill; 3,65 drill; 4,2 drill; Drill extender; Screw driver 1,25mm motor; Screw driver 1,25mm ratchet; Screw driver 1,25mm manual; Implant driver motor 2,42mm; Implant driver ratchet 2,42 mm; Parallel pin, double sided, long; Parallel pin, double sided, short; Ratchet 6.35 hex; Depth probe

UNIQADENTAL

FAQ

Yes, such as the UH8 Implant Pure&Porous. This is one of the most popular tapered implants with platform switching.

Production facilities are located in Israel. High-precision CNC equipment is installed there, which is operated by highly qualified specialists.

It depends on the initial clinical picture and the patient, but, on average, it takes 6-8 weeks. If the patient is elderly or has a rather loose bone structure, it is advisable to increase the time for osseointegration to 12-16 weeks.

This and all other parts are made of grade 23 titanium-aluminum-vanadium alloy, which is highly durable, but superior to all other materials in terms of ductility and resistance to elastic deformation. This is important for manufacturing thin parts like screws or small diameter thin-walled implants.

Yes, they are. Multi-Unit and T-base abutments have internal hex interface options, and they are fully compatible with implants with the same interface.

Yes, they can. More precisely, there are no direct contraindications, but it is necessary to look at the clinical picture of each patient. It might be necessary to put a plug instead of a gum former and cover the implant with soft tissue. Then after a few weeks, open it up and put in a gum shaper. At this stage, stability will be increased by improving bone quality. After all, the load from tongue movements and food clumps will be beneficial to bone density and strength.

Yes, they are. However, in these cases you must pay attention to whether there is a bone deficit to place the implant and, if the alveolar bone is not very wide, choose an implant with a minimum diameter.

Ζητήστε Τιμοκατάλογο

Εμπόριο Οδοντιατρικών & Οδοντοτεχνικών Ειδών

Επικοινωνία

Greece 2.0 Next Generation Banner